KENT Perk, a Chiller/ Water Dispenser, comes with KENT's patented Mineral RO TM Technology and an inbuilt TDS controller. Best suited for homes, offices, showrooms, restaurants, institutions, etc.
Applications | Suitable for Brackish/Tap Water |
Purification Capacity | Up to 40 L/hr |
Body Material | ABS Food Grade Plastic |
Installation | Floor Standing |
Inlet Water Pressure/Temp (Min) | 0.3 kg / cm 2 or 29419.95 Pa |
Inlet Water Pressure/Temp (Max) | 3 kg / cm 2 or 294199.5 Pa |
Filter Cartridges | Sediment, Carbon Block |
UF Filter | Ultrafiltration Membrane |
Auto-Flushing System | Yes |
Storage Capacity | 20L |
Membrane Type | Thin Film Composite RO 1812-75GPD |
Booster Pump Voltage | 24VDC |
Rated Current | 1.8 Amp |
Cooling Capacity(±5%) | 755BTU/hr |
Compressor | THK9384YCG, Tecumseh make or equivalent |
Temp. Class | ST |
Refrigerant | R134a |
Refrigerant Mass | 90g |
Condenser | Forced convection air cooled |
Condenser Fan | Axial Flow Type |
Expansion Device | Capillary Tube |
Evaporator | Coil Type |
Weight | 38.0 kg |
Input Power Supply | 230V AC, 50/60 Hz |
Patent No | 199716 |
Design Registration No | 219309 |
Installation, Warranty & After-Sales Service
Installation shall be done free of cost at customer's premises
Product warranty shall be effective from the date of installation. Warranty coverage period for different parts shall be as under:
After-Sales service shall be provided at customer's premises on demand basis
**Purification capacity tested on raw water with TDS level of 750 ppm at room temperature